by Chloe A. | Jul 17, 2025
Aluminum vs. Steel for Bending compares these two metals across formability, strength, weight, and springback. Aluminum stands out for its light weight, corrosion resistance, and high strength-to-weight ratio, ideal for thin-profile or aesthetic components, while...
by Chloe A. | Jul 17, 2025
Surface Finish and Coating Compatibility After Bending highlights how finishing processes—like anodizing, powder coating, or mill finish—interact with aluminum bending. It explains that anodizing and powder coating are best applied after bending to prevent surface...
by Chloe A. | Jul 17, 2025
This article compares welding and bending as aluminum joining methods, emphasizing how welding can degrade mechanical properties through heat-affected zones (HAZ), leading to reduced strength and distortion, whereas bending typically retains material integrity and...
by Chloe A. | Jul 17, 2025
Aluminum resists corrosion naturally thanks to its oxide layer, but performance varies by alloy and environment. This article explains factors affecting corrosion, from alloy composition to exposure conditions, and outlines enhancements like anodizing, powder coating,...
by Chloe A. | Jul 17, 2025
This guide compares heat-treatable and non-heat-treatable aluminum alloys, explaining their strengthening methods, formability, and applications. Heat-treatable alloys like 6061 and 7075 offer higher strength but may crack in tight bends, while non-heat-treatable...
